Facebook Twitter

Alcatel-Lucent OmniAccess Stellar AP1351 Tri Band 802.11ax 10.75 Gbit/s Wireless Access Point - Indoor

OAW-AP1351-RW
$ 1,602.88
Reg.: $ 2,946.80
Save 46%
Quantity:
Add
Shipping Information
Length 10.24" (260 mm)
Width 10.24" (260 mm)
Height 2.36" (60 mm)
Weight 2.37 kg

 
Brochure
 

Product Overview
  • 2.40 GHz, 5 GHz
  • Internal
  • MIMO Technology
  • 2 x Network (RJ-45)
  • 10 Gigabit Ethernet
  • PoE Ports
  • Bluetooth 5
  • Wall Mountable, Ceiling Mountable

The 802.11ax premium high-end OmniAccess Stellar AP1351 is designed to accommodate the very dense and high capacity needs of next generation mobility and IoT-enabled networks. These APs are powered with five built-in radios, three radios 2.4Ghz/5Ghz Low/5Ghz High band serving high density Wi-Fi clients, one full band radio dedicated for scanning, which can inherently improve network security and Wi-Fi quality, and an integrated Bluetooth/Zigbee radio enabling location and building automation services. The OmniAccess Stellar AP1351 series supports a maximum aggregate data rate of ?10Gbps (9.6Gbps in 5 GHz and 1.2Gbps in 2.4GHz). The access points dual 10Gbps uplinks provide POE resiliency and traffic load sharing.

The OmniAccess Stellar AP1351 supports 802.11ax (Wi-Fi 6) features, which include OFDMA, DL MU-MIMO, UL MU-MIMO, 1024-QAM modulation and more, making tomorrow's diverse digital workspaces highly reliable and efficient.

The OmniAccess Stellar AP1351 features enhanced WLAN technology with RF Radio Dynamic Adjustment, a distributed control Wi-Fi architecture, secure network admission control with Unified Access, built-in application intelligence and analytics, this makes it ideal for enterprises of all sizes that demand simple, secure and scalable wireless solution.

802.11 ax (Wi-Fi 6) High-efficiency features

IEEE 802.11ax allows enterprises to deliver high performance wireless LAN services with increased throughput, enabling more clients in dense environments and bringing power efficiency to IoT devices, while it remains fully backward compatible with existing 802.11 a/b/g/n/ac deployments. The 802.11ax standard is a dramatic step forward in wireless LAN technology for all organizations. Some of the key 802.11ax features enabled on OmniAccess Stellar AP1351 include:
  • Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improving efficiency, latency, and throughput. OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units (RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency.
  • Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients.
  • 1024 quadrature amplitude modulation mode (1024-QAM) boosting peak data-rates by as much as 25 percent.
  • BSS Coloring improves spatial reuse in dense environments by providing a mechanism for color coding different overlapping BSS's, allowing more simultaneous transmissions.
  • Extended Range (ER) provides increased coverage in scenarios where receiving side encounters high path loss and channel delay spread, especially in outdoor environments.
ManufacturerAlcatel-Lucent
Manufacturer Part NumberOAW-AP1351-RW
Manufacturer Website Addresshttp://www.al-enterprise.com
Brand NameAlcatel-Lucent
Product LineOmniAccess Stellar
Product ModelAP1351
Product NameOmniAccess Stellar AP1351 Wireless Access Point
Marketing InformationThe 802.11ax premium high-end OmniAccess Stellar AP1351 is designed to accommodate the very dense and high capacity needs of next generation mobility and IoT-enabled networks. These APs are powered with five built-in radios, three radios 2.4Ghz/5Ghz Low/5Ghz High band serving high density Wi-Fi clients, one full band radio dedicated for scanning, which can inherently improve network security and Wi-Fi quality, and an integrated Bluetooth/Zigbee radio enabling location and building automation services. The OmniAccess Stellar AP1351 series supports a maximum aggregate data rate of ?10Gbps (9.6Gbps in 5 GHz and 1.2Gbps in 2.4GHz). The access points dual 10Gbps uplinks provide POE resiliency and traffic load sharing.

The OmniAccess Stellar AP1351 supports 802.11ax (Wi-Fi 6) features, which include OFDMA, DL MU-MIMO, UL MU-MIMO, 1024-QAM modulation and more, making tomorrow's diverse digital workspaces highly reliable and efficient.

The OmniAccess Stellar AP1351 features enhanced WLAN technology with RF Radio Dynamic Adjustment, a distributed control Wi-Fi architecture, secure network admission control with Unified Access, built-in application intelligence and analytics, this makes it ideal for enterprises of all sizes that demand simple, secure and scalable wireless solution.

802.11 ax (Wi-Fi 6) High-efficiency features

IEEE 802.11ax allows enterprises to deliver high performance wireless LAN services with increased throughput, enabling more clients in dense environments and bringing power efficiency to IoT devices, while it remains fully backward compatible with existing 802.11 a/b/g/n/ac deployments. The 802.11ax standard is a dramatic step forward in wireless LAN technology for all organizations. Some of the key 802.11ax features enabled on OmniAccess Stellar AP1351 include:
  • Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improving efficiency, latency, and throughput. OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units (RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency.
  • Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients.
  • 1024 quadrature amplitude modulation mode (1024-QAM) boosting peak data-rates by as much as 25 percent.
  • BSS Coloring improves spatial reuse in dense environments by providing a mechanism for color coding different overlapping BSS's, allowing more simultaneous transmissions.
  • Extended Range (ER) provides increased coverage in scenarios where receiving side encounters high path loss and channel delay spread, especially in outdoor environments.
Product TypeWireless Access Point
Wireless LAN Standard802.11ax
Bluetooth StandardBluetooth 5
Network BandTri Band
Frequency Band2.40 GHz
Frequency Band5 GHz
Indoor/OutdoorIndoor
Wireless Transmission Speed10.75 Gbit/s
MIMO TechnologyYes
Beamforming TechnologyYes
Data EncryptionYes
Encryption StandardWPA3-SAE
Encryption StandardWPA2-ENT
Encryption StandardWPA3
Encryption StandardWPA3-ENT
Encryption StandardTKIP
Encryption StandardWEP
Encryption StandardWPA2
Ethernet Technology10 Gigabit Ethernet
Number of Network (RJ-45) Ports2
PoE (RJ-45) PortYes
PoE PD PortYes
USBYes
Management PortYes
Form FactorWall Mountable
Form FactorCeiling Mountable
Antenna Form FactorInternal
Height2.36" (60 mm)
Width10.24" (260 mm)
Depth10.24" (260 mm)
Weight (Approximate)2.37 kg
General Information
ManufacturerAlcatel-Lucent
Manufacturer Part NumberOAW-AP1351-RW
Manufacturer Website Addresshttp://www.al-enterprise.com
Brand NameAlcatel-Lucent
Product LineOmniAccess Stellar
Product ModelAP1351
Product NameOmniAccess Stellar AP1351 Wireless Access Point
Marketing InformationThe 802.11ax premium high-end OmniAccess Stellar AP1351 is designed to accommodate the very dense and high capacity needs of next generation mobility and IoT-enabled networks. These APs are powered with five built-in radios, three radios 2.4Ghz/5Ghz Low/5Ghz High band serving high density Wi-Fi clients, one full band radio dedicated for scanning, which can inherently improve network security and Wi-Fi quality, and an integrated Bluetooth/Zigbee radio enabling location and building automation services. The OmniAccess Stellar AP1351 series supports a maximum aggregate data rate of ?10Gbps (9.6Gbps in 5 GHz and 1.2Gbps in 2.4GHz). The access points dual 10Gbps uplinks provide POE resiliency and traffic load sharing.

The OmniAccess Stellar AP1351 supports 802.11ax (Wi-Fi 6) features, which include OFDMA, DL MU-MIMO, UL MU-MIMO, 1024-QAM modulation and more, making tomorrow's diverse digital workspaces highly reliable and efficient.

The OmniAccess Stellar AP1351 features enhanced WLAN technology with RF Radio Dynamic Adjustment, a distributed control Wi-Fi architecture, secure network admission control with Unified Access, built-in application intelligence and analytics, this makes it ideal for enterprises of all sizes that demand simple, secure and scalable wireless solution.

802.11 ax (Wi-Fi 6) High-efficiency features

IEEE 802.11ax allows enterprises to deliver high performance wireless LAN services with increased throughput, enabling more clients in dense environments and bringing power efficiency to IoT devices, while it remains fully backward compatible with existing 802.11 a/b/g/n/ac deployments. The 802.11ax standard is a dramatic step forward in wireless LAN technology for all organizations. Some of the key 802.11ax features enabled on OmniAccess Stellar AP1351 include:
  • Orthogonal frequency division multiple access (OFDMA) enabling more clients to simultaneously operate in the same channel and thereby improving efficiency, latency, and throughput. OFDMA can concurrently address multiple clients in both directions downlink (DL) and uplink (UL), including OFDMA Resource Units (RUs). OFDMA is very effective in environments where there are many devices with short frames demanding lower latency.
  • Multi-user multiple input, multiple output (MU-MIMO) allowing more data to be transferred at once and enables an access point to handle a larger number of concurrent clients.
  • 1024 quadrature amplitude modulation mode (1024-QAM) boosting peak data-rates by as much as 25 percent.
  • BSS Coloring improves spatial reuse in dense environments by providing a mechanism for color coding different overlapping BSS's, allowing more simultaneous transmissions.
  • Extended Range (ER) provides increased coverage in scenarios where receiving side encounters high path loss and channel delay spread, especially in outdoor environments.
Product TypeWireless Access Point
Technical Information
Wireless LAN Standard802.11ax
Bluetooth StandardBluetooth 5
Network BandTri Band
Frequency Band2.40 GHz
Frequency Band5 GHz
Indoor/OutdoorIndoor
Wireless Transmission Speed10.75 Gbit/s
MIMO TechnologyYes
Beamforming TechnologyYes
Data EncryptionYes
Encryption StandardWPA2-ENT
Encryption StandardTKIP
Encryption StandardWPA3-ENT
Encryption StandardWPA3
Encryption StandardWPA3-SAE
Encryption StandardWPA2
Encryption StandardWEP
Interfaces/Ports
Ethernet Technology10 Gigabit Ethernet
Number of Network (RJ-45) Ports2
PoE (RJ-45) PortYes
PoE PD PortYes
USBYes
Management PortYes
Physical Characteristics
Form FactorWall Mountable
Form FactorCeiling Mountable
Antenna Form FactorInternal
Height2.36" (60 mm)
Width10.24" (260 mm)
Depth10.24" (260 mm)
Weight (Approximate)2.37 kg
Miscellaneous
Additional InformationMaximum (worst case) power consumption:
  • 45W (input IEEE 802.3bt POE); Unrestricted functionality
  • 42W (input dual IEEE 802.3at POE); The USB port is disabled
  • 24W (input IEEE 802.3at POE); The USB port is disabled, Eth1 port is disabled, tri radio downgrade to 2*2


Quick Links
Company Info
ITEXPRESS DIRECT INC
1500 Upper Middle Rd W
Suite 310
Oakville, ON
L6M 0C2
Canada

Sign up now
Connect With


Call Us
888-728-9486
Copyright © 2024 ITEXPRESS DIRECT INC All rights reserved.
All other trademarks are the property of their respective owners.